Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1a. Unpack the unit and confirm that you have all the hardware and
required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratch.
1b. Securely screw 31 cam bolts (BB) into the designated small holes
on the top panel (A), bottom panel (B) and center shelf (C). Fully
tighten with a Phillips screwdriver.
Hardware Used
Cam Bolt
BB
2. Glue two wood dowels (CC) into the inner holes of middle
crossbar (L) and attach it to the center shelf (C) by engaging
three cam locks (AA).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
UU
Glue
3. Glue four wood dowels (CC) into the top inner holes of both
partition panels (F and G) and attach them to the center shelf
(C) with four cam locks (AA).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
Glue
UU
1
A
C
x 31
B
2
AA
CC
x 3
L
x 2
x 1
3
C
x 4
F
x 4
x 1
CC
AA
6
ASSEMBLY INSTRUCTIONS
4. Glue four wood dowels (CC) into the bottom inner holes of
both lower partition panels (F and G) and attach them to the
bottom panel (B) with four long screws (FF).
BB
Hardware Used
CC
Wood Dowel
FF
Long Screw
D
Glue
UU
E
5. Glue six wood dowels(CC) into the inner holes of the bottom
stretchers (I and J) and attach them to the bottom panel (B)
by engaging eight cam locks (AA).
The cam locks
Hardware Used
face inward
AA
Cam Lock
CC
Wood Dowel
C
UU
Glue
6a. Glue ten wood dowels (CC) into the inner holes of the previous
assembly at both ends.
6b. Align the large holes on both side frames (D and E) with the
inserted wood dowels and press them together. Attach the side
frames (D and E) in place by engaging ten cam locks (AA).
G
Hardware Used
AA
Cam Lock
CC
The stiles
Wood Dowel
face inward
UU
Glue
4
G
x 4
F
B
x 4
CC
x 1
5
B
x 8
x 6
CC
x 1
AA
6
C
B
x 10
D
x 10
x 1
7
Raw edge
FF
J
I
E
I
AA
CC
Publicidad
