Fein Slugger JCM312U Instrucciones De Uso página 14

3 41 01 169 21 0.book Seite 14 Mittwoch, 7. September 2011 3:32 15
en
14
Filling the removed coolant tank. (Fig. 5).
Pull the empty coolant tank out of drill
stand housing of the magnetic base drill.
Unscrew the bottom closing cap from
the coolant tank.
Fill in pump-feedable water soluble
Slugger Cutting Fluid. Do not use oil!
Firmly screw the bottom closing cap
back on to the coolant tank.
Insert the filled coolant tank into the
holder on the drill stand housing inten-
ded for this purpose.
Bottom closing cap
Coolant container
Fig. 5