6.7 Enabling/Disabling Voice Activated Intercom
Voice Prompt
Factory Default
Enable / Disable
Tap the (+) Button or the (-) Button until you hear the voice prompt,
"VOX intercom". If this feature is enabled, you can initiate an
intercom conversation with the last connected intercom friend
by speaking any word loudly enough. If you start an intercom
conversation by VOX, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds.
6.8 Setting Intercom VOX Sensitivity
Voice Prompt
Factory Default
Level Adjustment
Apply
Tap the (+) Button or the (-) Button until you hear the voice prompt,
"VOX sensitivity". By tapping the Center Button, it will lead you
to the level adjustment mode. If you enter the mode, you will hear
a prompt stating the current VOX sensitivity level. You may adjust
"VOX intercom"
Disable
Tap the Center Button
"VOX sensitivity"
3
Tap the (+) Button or the (-) Button
(1 ~ 4)
Tap the Center Button
the VOX sensitivity level by tapping the (+) Button or the (-) Button.
Level of 4 is the highest sensitivity setting and 1 the lowest. After
you have completed the setting, tap the Center Button to apply
the changes.
6.9 Enabling/Disabling Voice Prompts
Voice Prompt
Factory Default
Enable / Disable
You can disable voice prompts by configuration setting, but the
following voice prompts are always on.
- Voice prompts for configuration setting menu
- Voice prompts for battery level Indicator
- Voice prompts for factory reset
6.10 Enabling/Disabling Sidetone
Voice Prompt
Factory Default
Enable / Disable
Sidetone is the sound of your own voice as picked up by your
headset's microphone and reproduced in your own ear, by your
X-COM
"Voice prompt"
Enable
Tap the Center Button
"Sidetone"
Disable
Tap the Center Button
13