Maintenance; General Maintenance - EGO POWER+ BA1400T Manual Del Usuario

HOW TO CHARGE THE BATTERY PACK
Follow the instructions in the Operator's Manual for the EGO CH5500/CH5500-FC Rapid
Charger or CH2100/CH2100-FC Standard Charger.
TO ATTACH AND DETACH THE BATTERY PACK
Follow the instructions in the Operator's Manual for the individual EGO product.

MAINTENANCE

WARNING:
from the tool when cleaning or performing any maintenance.
WARNING:
any other parts may create a hazard or cause product damage.
WARNING:
method for the battery pack. If cleaning with compressed air is the only method to
apply, always wear safety goggles or safety glasses with side shields when using
compressed air to clean the tool. If the operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their use.
Use clean clothes to remove dirt, dust, oil, grease, etc.
WARNING:
products, penetrating oils, etc. to come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
WARNING:
to a short circuit, never immerse your tool, battery pack or charger in fluid or allow
a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach containing products, etc., Can cause a short
circuit.
14
56V BATTERY 2.5AH/5AH/7.5AH/10AH
To avoid serious personal injury, always remove the battery pack
When servicing, use only identical EGO replacement parts. Use of
It is not recommended to use compressed dry air as a cleaning
Do not at any time let brake fluids, gasoline, petroleum-based
To reduce the risk of fire, personal injury, and product damage due