Safety Instructions - Ribimex Ribiland Manual De Instrucciones Y Mantenimiento

II. CHARACTERISTICS
Description
Reference
Model / Type
Power Source
Max. Power
Operating cycles
Working Temperature
Working pressure
Protection Class
Inlet & Outlet Connection
Symbols
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Caution! Risk of injury and/or damage and/or deterioration of product in case of non
compliance to safety requirements
Read the instructions manual.
Keep persons (esp. children) and animals away from product and working area
Disconnect product from its power source before maintenance, cleaning ou any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or extension
cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its
safe disposal.
III. SAFETY INSTRUCTIONS
Before using this product, read and understand all safety instructions.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to persons and animals.
READ ALL THE INFORMATION BEFORE OPERATING THE PRODUCT.
1. Keep work/installation area clean
Cluttered areas invite accidents and injuries.
2. Consider work area//installation environment
Do not expose product to rain or to humidity.
Keep work area/installation well lit (natural light or sufficient artificial lighting).
Do not use product where there is risk to cause fire or explosion (in the presence of flammable liquids,
solids or gas).
3. Guard against electric shock
Automatic Pump Control 2200W
PRPCONTROLP/1 / 511791
HYSK102
220-240V ~ 50Hz Max.10A
2200W
50000
60°C max
1.0 Mpa (10bar) max
IP65
1'' male
Page 10 / 32