Practical handling
Positioning
2Move incl. nylon cover and/or tube foil is positioned under
the user by rolling the user slightly away from the direction of
movement, preferably using an absorbent sheet. 2Move is
positioned under the user after which the user is rolled back.
Use
By applying a little pressure to the shoulder and hip, the carer
can move the user over onto the other bed. If a sheet is used,
it is a good idea to position 2Move underneath the sheet.
Positioning then takes place as described above, but using the
sheet to pull on (Illustrations 1 and 2).
2Move can easily be removed by sliding 2Move out from under
the user: The carer places one hand over the board and the
other under it. Then, the carer eases the nylon material away
with the upper hand while pulling towards him/herself with the
lower hand.
2Move should only be placed a few inches under the user.
Position the user's head and legs carefully onto the board. If
possible, it is helpful to cross the user's legs so that the leg that
is closest to the board is lowest with the other leg crossed over it.
2Move can also be removed by first removing the board from
the cover and then removing the cover by pulling on the lower
layer of the cover.
5