Stile CF13650 Guia De Instalacion página 12

INSTALLATION
 Carefully feed the fan's electrical wiring through the pivot
ball, then reinstall the pivot ball on the downrod with the
flat side facing the ceiling.
DOWNROD
 Reinstall the ground wire with the wire facing up to ensure
proper grounding, make sure the star washer is reinstalled
in the location shown below.
GROUND
SCREW
GROUND WIRE
STAR WASHER
 Reinstall the retainer pin in the downrod.
DOWNROD
PIVOT BALL
FLAT SIDE UP
 Lift the pivot ball back to the top of the downrod until the
retainer pin is captured. Tighten the screw to secure.
NOTE: When the pivot ball is oriented correctly, it will
also cover the ground screw and will be flush with the
top of the downrod.
PIVOT BALL FLUSH WITH
TOP OF DOWNROD
RETAINER PIN
12 - English
For Canada installations, refer to the Canada
Installation Addendum and install the support
cable on the retainer pin now.
For Canada installations, refer to the Canada
Installation Addendum and test the support
cable connection now.
RETAINER PIN
SCREW