Assembly - Brinly PRC-241 BH Manual Del Propietário

================================================================================================
Assembly Step 1
Attaching the Scraper Bar
Hardware Panel A
Add a 5/8" flat washer (7) to the
Roller Drum (2) as illustrated.
Slide a square bearing (10) into
the large square hole at the end of
the Scraper Bar (3) and add to the
Roller Drum.
Add another 5/8" flat washer (7).
Secure everything in place by
sliding a 5/8" E-ring (11) into the
slot at the end of the roller drum (2).
Repeat this step on the
other end of the drum.
Assembly Step 2
Hardware Panel B
Align the Frame Extension Bar (1)
as illustrated.
From the outside, run two
5/16 x 1" Carriage Bolts (4) through
the Extension Bar (1) and Scraper
Bar (3) as illustrated.
Secure everything in place with two
5/16" Nylon Lock Nuts (8).
Repeat this step on the
other end of the drum.
English Manual

ASSEMBLY

2
8
3
1
5
10
3
7
7
11
4
L-1681BH-F