•
Cut food into small pieces (1.5 x 1.5 cm) and insert it into the
chopper goblet (9).
•
Mount the chopper lid (7) on the goblet (9) so that the lower part of
the lid perfectly fits on the reference notch on the goblet.
•
Press and rotate clockwise the chopper lid until it completely locks,
Fig. G.
•
Make sure the upper part of the blade (8) is properly inserted in the
apposite housing on the lid cover.
BEFORE USING THE APPLIANCE, MAKE SURE THE BLADES
AND THE LID ARE PROPERLY MOUNTED.
•
Position the motor unit (1) on the chopper lid (7) and rotate it
clockwise to lock it (Fig. H).
•
Assemble the appliance and start it by pressing the speed button (2).
Only after few seconds, according to preparation and kinds of food, it
is possible to increase the speed by pressing the relevant button (3).
•
The best performance of the appliance is achieved through a pulse
functioning by pressing the button (1) for a very short time (2 - 3
seconds).
IN CASE THE APPLIANCE DOES NOT WORK, CHECK THE
ATTACHMENTS ARE PROPERLY INSERTED.
•
For a thin, smooth ground, if necessary, remove food from the side
of the goblet (9) and bring it to the centre using an apposite spatula
(not supplied), after having removed the motor unit (1).
•
To interrupt the appliance functioning, just release the speed button
pressed (2-3).
4. Use
UK
39