Certificate Of Guarantee - Ridea 121. ROUND Advertencias E Instrucciones Para El Montaje

carry the weight of the radiator. The radiators are supplied as standard with 8mm
diameter plugs for reinforced concrete. Follow the dimensional indications
provided in the table and the drawing in fig. 1. Furthermore it is advisable to
secure 2 supports on one side (right or left, indifferently) of the radiator first, and
then mark the fastening points on the wall for the remaining 2 supports by closing
the radiator against the wall.
3.3 Fit the hoses supplied as standard, first to the radiator manifold by screwing
the male connector terminal, and then to the wall-mounted valves by rotating the
female connectors.
3.4 Having completed the hydraulic connections, position the radiator against the
wall and secure the pin to the closing cylinder with the Allen screw already
mounted in the cylinder as shown in fig. 3.
At the end, test the plant in order to verify the tightness of the manifolds.
N.B. Bleed the radiator by means of the air valve fitted to the upper part of the
radiator before use.

4. CERTIFICATE OF GUARANTEE

This certificate guarantees the originality of RIDEA design, developed and
constructed expressly for you in a limited series, by combining craftsmanship and
innovative technologies, and by making use of the finest and most exclusive
materials and finishes.
At the end of the production process the radiator undergoes stringent quality
controls.
Ridea furthermore certifies that this product has been conceived, designed and
manufactured in Italy. Small imperfections are not defects but qualities attesting
hand-made construction.
Ridea guarantees the use of ecological paints.
Thank you for choosing a Ridea product.