Technical Specifications; Trademarks And Licenses - Denon Professional DN-308S Guia Del Usuario

Appendix (English)

Technical Specifications

Type
LF Driver
HF Driver
Frequency Response
Crossover Frequency
LF Amplifier Power
HF Amplifier Power
Signal-to-Noise Ratio
Input Connectors
Polarity
Input Impedance
Input Sensitivity
Protection
Indicator
Power Requirements
Cabinet
Dimensions
(height x width x depth)
Weight
(without packing)
Specifications are subject to change without notice.

Trademarks and Licenses

Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their
respective owners.
WARNING: This product contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm. (California law requires this warning to be given to
customers in the State of California.)
22
2-way near-field studio reference monitors
8-inch (203 mm) Kevlar curved cone with high temperature voice
coil and damped rubber surround, magnetically shielded
1-inch (25 mm) magnetically shielded natural silk dome
38 Hz – 22 kHz
2.2 kHz
70 W
60 W
> 100 dB typical A-weighted
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Positive signal at + input produce outward LF cone displacement
20 KΩ balanced, 10 KΩ unbalanced
85 mV pink noise input produces 90 dBA output SPL at 1 meter
with volume control at maximum
RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external mains fuse.
Power on/off indicator on rear panel
100-120V, 50/60 Hz; 220-240V, 50/60 Hz
Metal grille and plastic front baffle with vinyl-laminated high-
acoustic-efficiency MDF
15" x 10" x 12"
381 mm x 254 mm x 305 mm
23.6 lbs.
10.7 kg
California Proposition 65 Warning