Temperature Settings Warnings; Accessories; The Fresh Dial - EAS ELECTRIC EMR177ASI Manual De Uso

3.3 Temperature Settings Warnings

• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• Do not start another adjustment before
completing one adjustment.
• Temperature adjustments should be
made according to the frequency of door
openings and the quantity of food kept
inside the fridge.
• When you first switch on the appliance,
allow it to operate for 24 hours in order
to reach normal operating temperature.
During this time, do not open the door or
place a lot of food inside the appliance.
• If the appliance is switched off or
unplugged, wait at least 5 minutes before
plugging the appliance in or restarting
it in order to prevent damage to the
compressor.
• Your fridge is designed to operate within
specific ambient temperature ranges,
according to the climate class stated
on the information label. We do not
recommend operating your fridge outside
the stated temperatures value limits.
• Your appliance is designed to operate in
the ambient temperature (T/SN = 10°C
- 43°C) intervals stated in the standards,
according to the climate class displayed
on the information label. We do not
recommend operating your appliance out
of the stated temperature limits in terms
of cooling effectiveness.
Climate class and meaning:
T (tropical): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 43 °C.
ST (subtropical): This refrigerating
appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance
is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
SN (extended temperate): This
refrigerating appliance is intended to be
used at ambient temperatures ranging from
10 °C to 32 °C.
The Turbo Fan
Do not block the air inlet and outlet
openings when storing food, otherwise air
circulation provided by the turbo fan will be
impaired.

3.4 Accessories

Visual and text descriptions in the
accessories section may vary according
to the model of your appliance.

3.4.1 The Fresh Dial

If the crisper is full, the fresh dial located
in front of the crisper should be opened.
This allows the air in the crisper and the
humidity rate to be controlled, to increase
the life of food within.
The dial, located behind the shelf, must be
opened if any condensation is seen on the
glass shelf.
EN - 55
Turbo fan
Fresh dial
V.1