Cleaning & Maintenance - andi be free WIRELESS CUPHOLDER CHARGER Manual Del Usuario

REMOVING YOUR SMARTPHONE
The magnetic force between the
smartphone and the andi be free
®
wireless cupholder charger has been
designed to hold your smartphone
securely. If you wish to remove your
smartphone, you need to interrupt
the magnetic field by tilting your
smartphone sideways away from the
charging head.
CLEANING & MAINTENANCE
Disconnect your andi be free wireless cupholder charger from the power
®
supply before cleaning it.
Clean your andi be free wireless cupholder charger carefully with a micro-fi-
®
bre cloth. Do not use any liquids which will damage electrical components or
substances which will damage the paintwork.
14
Never submerge the device in water or other liquids.
Do not use any abrasive or aggressive cleaning agents since they may damage
the surface.
IF YOUR CHARGER DOESN'T WORK
Check whether you can resolve the problem using one of the following
suggested solutions.
THE SMARTPHONE CANNOT BE DOCKED ONTO THE andi be free
CUPHOLDER CHARGER.
Does your smartphone meet compatibility requirements? Check at www.andi.
store.
THE SMARTPHONE DOES NOT START CHARGING.
Remember the smartphone will only start charging if the vehicle engine is run-
ning. Check the control lights on the rear of the andi be free
er charger. The control light will light up continuously if power is connected
correctly.
WIRELESS
®
wireless cuphold-
®
15