(but don't do this if you are the rider only if the pillion!)the
sound will be automatically heard in yourheadset
Notice: some phones, like Panasonic x70,will not send the audio
to the headset automatically, you may have to press the phone/
play key to transmit the sound to your headset
5)Dial the last number press the phone/play key 2-3 seconds, it
will dial the phone number that you dialed last time. (Note: some
cell phone do not support this function) when redial the call
Interphone Function
Set up for bike-to-bike and rider-to-pillion intercom: pairing
Pairing is a one time process that is required for mutual
recognition between a headset and other Bluetooth devices. once
the two headsets are paired, they will retain paired whenever they
are within range.
Please note that you can speak via intercom to one buddy headset
at a time.
1) Pair with another rider
Simultaneously hold the power/interphone key on both matching
BIM until the red & blue LED of the two pairing BIM's flash, short
press the power/interphone key on one of BIM,a moment later the
red LED will extinguish and the blue LED will flash briefly every
2-5seconds,thus they have finished the pairing.
2) Pair with two other rider and chose which rider you will talk with
You can set up your BIM as a master device and you can pair with
two BIM of other riders, then you can talk with two riders at
different time.
STEP: Pair your BIM (BIM a) with one rider (BIM b)as 1) above, then
turn off the BIM b. pair your BIM with another rider (BIM c).When
finish the pairing procedure, you can turn on the BIM b.
lnitiate an intercom call (a short press the Power/lnterphone
key on your BIM), and you can talk with BIM c. However, a long
press the Power/lnterphone Key, you will hear a beeb "du-du"
promptly release your hand: it will change the communication to
talk with BIM b.
Note: for a,b,c three units, only two units could be set as master
units, then the third(slave)unit can not initiate an intercom
talking, when one of the master unit change communication to talk
with the slave unit, the slave unit will become master unit.
3) Pair with your pillion
18
english