Important - Zepter PBG-865 Manual De Instrucciones

EN
Cleaning the Epilation Head:
1. Remove the disc housing by gently pulling on each side of the head of the unit (fig 11).
2. Use the brush provided to brush out any hair that has accumulated between the tweezer
discs and inside the disc housing (fig 12).
3. Replace the disc housing by pressing lightly until you hear it click into place (fig 13).
4. Remove the epilation head from the unit by pressing the release button on the side of the unit
(fig 14).
5. Use the brush provided to remove any hair that has accumulated between the unit and the
epilation head.
6. Replace the epilation head by pressing until you hear it click into place (fig 15).
Note: When placing the epilation attachment into the unit,make sure that the teethed wheel on
the unit and the teethed wheel on the epilation attachment line up.
7. Replace the protective cap.
Cleaning:
To clean the stainless steel tweezers, use rubbing alcohol on the tip of the tweezers with a cotton
swab that has been squeezed dry.
Note: Make sure that the cotton swab is not soaked with alcohol. Do not use any other liquid on
this unit other than rubbing alcohol.
11
14
6
12 13
15
Warranty
The Zepter Hair Remover warranty against defects in material and workmanship lasts one
year from the date of purchase. During this warranty period your local retailer will take care
of repair, or at their discretion, will care of replacement of the defective unit without charge.
Keep original receipt for warranty service.

Important:

This warranty does not cover damages resulting from accidents, misuse, alterations, abuse, lack
of reasonable care, or performance of services or repairs by an unauthorized service center.
The manufacturer and the distributor of Zepter Hair Remover do not assume responsibility
for any damage caused by misuse or purposes which are not described in these instructions.
Contoured for Perfect for legs
the face
INFORMATION FOR USERS
In accordance with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE on the
restriction of the use of dangerous substances in electric and electronic equipment as well as
their waste disposal. The barred symbol of the rubbish bin shown on the equipment indicates
that, at the end of its useful life, the product must be collected separately from other waste.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities;
therefore, any products that have reached the end of their useful life must be given to waste disposal centres
specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at
the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for
the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally
compatible way contributes to preventing possible negative effects on the environment and health and
optimises the recycling and reuse of components making up the apparatus.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being. Contact your local
government for information regarding the collection systems available. Abusive disposal of the product by
the user involves application of the administrative sanctions according to the laws in force.
Great for Ideal for the most
bikini line sensitive areas
EN
7