Gira 5435 Manual De Instrucciones página 19

Actuador inalámbrico de pulsadores/interruptores de 8 elementos / actua­
dor de persianas de 4 elementos
Recall sun protection slat posi-
tion
Deactivate sun protection
blind position
Deacitvate sun protection slat
position
Priority, twilight
Activate twilight blind position
Activate twilight slat position
Deactivate twilight blind posi-
tion
Deacitvate twilight slat position 0 ... 100 %
Information window
During channel selection in the Information window, the following settings can be made or va-
lues displayed.
"Switching"
Display value
Load state
Restraint
Operating hours
"Venetian blind"
Display value
32581922 10864984
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 0 %
0 ... 100 %
Basic setting: 0 %
0...4
Basic setting: 0
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 100 %
0 ... 100 %
Basic setting: 0 %
Basic setting: 0 %
Explanations
The load can be switched on or off.
Display of forced position status.
Display of the operating hours since the last
restart in the Settings window Einstellungen.
Explanations
23.03.2017
Defines the slat position of the
output on activating the sun
protection. Only visible when
the Venetian blind operating
mode is set.
Defines the behaviour of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0.
Defines the slat position of the
output on deactivating the sun
protection. Only visible when
the priority for the sun protec-
tion is 0 and the Venetian
blind operating mode is set.
Specifies the priority for reca-
lling and removing a scene of
type Twilight for the channel.
Defines the behaviour of the
output on activating the twilig-
ht function.
Defines the slat position of the
output on activating the twilig-
ht function. Only visible when
the Venetian blind operating
mode is set.
Defines the behaviour of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0.
Defines the slat position of the
output on deactivating the twi-
light function. Only visible
when the priority for the twilig-
ht function is 0 and the Vene-
tian blind operating mode is
set.
19/21