Honeywell 4000 PRO Serie Guia Del Usuario página 3

Save money by setting program schedules
It's easy to program your system for maximum energy savings. You can program
four time periods each day, with different settings for weekdays and weekends.
WAKe
6:00 am
°
70
LeAVe
8:00 am
°
62
RetURN
6:00 pm
°
70
SLeeP
10:00 pm
°
62
This thermostat is pre-set with energy-saving program settings. We recommend
these settings, since they can reduce your heating/cooling expenses. If you need
to create a new schedule follow the steps on the next page.
To adjust program schedules
1. Press SET until Set Schedule is
displayed.
2. Press or
s t
Wake time (Mon-Fri), then press SET.
3. Press or
s t
for this time period, then press SET.
4. Set time and temperature for the next
time period (Leave). Repeat steps 2
and 3 for each weekday time period.
5. Press SET to set weekend time
periods (Sat-Sun), then press RUN to
save & exit.
Note: Make sure the thermostat is set
to the system you want to program (Heat
or Cool).
Note: To cancel an unwanted time
period (except Wake), press and hold
+ HOLD for 4 seconds while in the Set
s
Schedule mode.
Set to the time you awaken and the temperature you want
during the morning, until you leave for the day.
Set to the time you leave home and the temperature you
want while you are away (usually an energy-saving level).
Set to the time you return home and the temperature you
want during the evening, until bedtime.
Set to the time you go to bed and the temperature you want
overnight (usually an energy-saving level).
to set your weekday
to set the temperature
3
Set T o
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri
Set T o
75
Set Schedule
6 : 30
AM
Heat
Wake
MonTueWedThuFri