Connecting A Computer - Connecting A Computer To The Back Of The Television - Toshiba 46 WM48 Serie Manual Del Usario

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
the back of your television
Connect the PC cable from the computer to the PC
terminal on the back of the television.
Press the B to select PC mode.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA 480-60)
SVGA: 800 x 600/60 Hz (VESA 600-60)
XGA: 1024 x 768/60 Hz (VESA 768-60)
PLEASE NOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15p terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
strength of the signal, it is not a malfunction.
When PC input mode is selected some of the
television's features will be unavailable e.g Manual
setting in the SET UP menu, Colour, Tint, DNR and
Black Stretch in the PICTURE menu.
Connecting a computer
Mini D-sub
RGB PC cable
15p connector
(not supplied)
Conversion adaptor if
required (not supplied)
Audio cable for PC to
television connection
(not supplied)
Signal information for Mini D-sub 15p connector
Pin assignment
for RGB/PC
terminal
Pin. No. Signal name
1
2
3
4 NC (not connected)
5
6
7
8
7
Computer
Pin No. Signal name
R 9
G 10
B 11
12
NC 13
Ground 14
Ground 15
Ground
NC
Ground
NC
NC
H-sync
V-sync
NC