Refreshing Carpet; After Steam Cleaner Use / Using Cooling Tray - Hoover TwinTank Manual Del Propietário

ReFReshinG CaRPet

WARNING
!
Do not clean over floor electrical outlets.
Do not use steam cleaner or press the Steam
Trigger without water in the water tank.
IMPORTANT
When using on carpets, always ensure the
multi-surface Microfiber Pad is properly
attached to the Mop Head.
„ Use steam alone. Do not use cleaning
solution. Turn Solution Control dial to
"STEAM ONLY".
„ The steam cleaner will take roughly 30
seconds to be ready to produce steam.
Once steam is ready to be produced, the
green "steam ready" indicator will illuminate.
„ Place the steam cleaner into the Carpet Glider
(2.17).
„ To recline the steam cleaner place foot on
Mop Head and gently pull handle backwards
(2.18).
„ To produce steam squeeze the Steam Trigger
(2.19).
„ Move the Steam Mop slowly backwards and
forwards across the floor (2.20) paying
particular attention to high traffic areas.

aFteR steaM CleaneR use / usinG CoolinG tRay

„ After using Steam Mop and to avoid damage
to your floors, unplug and place Steam Mop
in Cooling Tray (2.21) until product cools.
Once steamer
Microfiber Pad and follow maintenance
instructions on page 10 to avoid mold and
mildew.
!
has cooled, remove
2.17
2.19
NOTICE: The Carpet Glider does not stay attached
to the mop, it is designed in this way.
2.21
9
2.18
2.20