Toro TMC-424E Manual De Consulta Rápida página 9

To Set Interval Days:
1. Set the Program Switch to select
program A, B, C, or D.
2. Turn the Function Dial to the Interval
Days position.
3. The
CYCLE LENGTH
current Interval (01–31DAY or -- -- -- [Off])
will be displayed.
4. Press the or
Interval cycle length.
NOTE: The cycle length can be set from
01 (water every day) to 31 (water once
every 31 days). The Interval cycle starts
at 01 and increases by 1 digit each day.
The watering day occurs when the
selected Interval cycle length is reached.
To specify when the first watering day
will occur, the current day within the
Interval cycle must be selected.
prompt and the
button to select the
For example, if a 04 DAY Interval is
entered and watering is to begin in one
day, select 03 as the Current Day.
5. To select the Current Day in the Interval
cycle, press the
CURRENT DAY
6. Press the or
value (01–selected Interval number).
7. To exclude specific days from watering
(7 maximum), press the
select the day.
8. To exclude the day from the schedule,
press the or
Watering Off
9. Repeat steps 7 and 8 to continue
excluding days.
button to display the
prompt.
button to select the
button to
button to display the
icon.
9