Battery Specifications - KLAN DUAL POWER K-KIT-BAT-7,4V-3A Instrucciones De Uso

Be sure to use your batteries with Klan Dual Power products with an
amp rating less than the maximum output capacity rating of the
battery. For example, the Li-po battery pack has a maximum output
current of 3Ampere and should not be used with heated products
that require more than 3 amps. Please check the consumption of the
products before connecting battery pack. Failure to do so can
overheat the battery causing damage.
DISPOSAL

Do not place in fire or incinerate

Do not dispose in refuse

Recycle in accordance with local regulations
WARNINGS

Do not attempt to disassemble or alter any part of this product.

Do not store below -20° C or above 60° C.

Do not allow this product to have contact with water or other
liquids. If water or other liquids enter the battery interior,
immediately unplug the product from the battery. Continued use
of the product may result in fire or an electrical shock.

Do not place this product near a heat source or expose the
battery to direct flame or heat, as the battery may explode.

Please read the following warnings carefully before using the K-
KIT-BAT-7,4V-3,0A AND K-KIT-BAT-12V-3,0A.
Use the product correctly and according to the procedures
described in this manual.

BATTERY SPECIFICATIONS


K-BAT-7,4VOLT-3,0A Rating: 7.4 volt, Capacity: 3000 mah, max
output current 3000mAh

K-BAT-12VOLT-3,0A Rating: 12 volt, Capacity: 3000 mah, max
output current 3000mAh
CHARGER SPECIFICATIONS

K-CHARGER-7,4VOLT-2Ah DC 8,4volts charging current 2000
mah.

K-CHARGER-12VOLT-2Ah DC 12,8volts charging current 2000
mah.

Charging time: 2 hours for one battery 4hours for two batteries
KIT COMPOSITIONS

K-KIT-BAT-7,4V-3,0A is composed by 1 K-CHARGER-7,4-VOLT-2Ah
and two batteries K-BAT-7,4VOLT-3,0A

K-KIT-BAT-12V-3,0Ais composed by 1 K-CHARGER-12-VOLT-2Ah
and two batteries K-BAT-12VOLT-3,0A
7
EN