Cleaning the Tub Filter
The tub filter filters out and collects debris and other materials while the washer is operating.
If no filter is installed, laundry could be contaminated by other materials. Please clean the filter
periodically.
1. Lift the filter up to remove it as shown in the figure.
2. Turn the filter inside out to remove other materials.
•
If the filter mesh is clogged, the laundry can be contaminated.
3. Thoroughly clean and rinse the filter with water.
4. Insert the lower part of filter, and then push it in the direction
of the arrow as shown in the figure. When you hear a 'click', it
means the filter is in place.
•
The filter is a disposable part. If damaged, please contact
your local service center for a replacement.
Untitled-2 33
English - 33
2014-05-26
10:51:15