THOMSON DSC 725S Manual De Instrucciones página 43

OUTDOOR 1080P IP WIFI CAMERA
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com:
sender-address@gmail.com
recipient@gmail.com receives the alerts. Both
addresses need to have been created beforehand.
To program email alerts for movement detection,
right click a camera in the list at the top right
of the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]". Then
go to "Réseau [Network]", "Paramètres messagerie
[Message settings]":
sends the alerts,
1 2 3 4 5 6
7 8 9
D - CONFIGURATION AND USE
Tick the "Activer [Activate]" box to activate
1
email sending
SMTP server: depends on the email provider
2
of address that sends the alert. In our
example, using Gmail, smtp.gmail.com
SMTP port: varies with the email provider
3
of the address sending the alert. In our
example using gmail, 465
Security: security when connected to the
4
email provider. In our example using Gmail,
TLS
Authentication: indicates whether connection
5
is compulsory (authentication) to send an
email. In our example using Gmail: Yes (in
other words: you cannot send an email
via Gmail if you are not logged into your
account).
SMTP user name: Name that you should
6
enter to log in to the mailbox that will send
the alerts. In our example using gmail, this is
the sender address: sender-address@gmail.
com
SMTP password: The password used to log
7
in to sender-address@gmail.com, in our
example
Sender: Enter the new address used to send
8
the alerts: sender-address@gmail.com. Click
"Test" to check that your settings are correct
and that the camera is able to connect to
www.thomsonsecurity.eu
the email account you entered for sending
the alerts.
Recipient, etc.: Use this space to enter the
9
address(es) which will receive the alerts. In
our example: addressee@gmail.com
IMPORTANT: When you have finished configuration,
do not forget to click "Save" to save everything you
have entered.
EN
17 EN