Masseur In-A-Box
Po r t a b l e M a s s a g e M a t
Demo Button
NOTE: the massage
For a demonstration of the features of the portable
massage mat, press the Demo button.
mechanism always
The unit will briefly go through each function.
"parks" or finishes
Once complete, the unit automatically turns off.
in its highest
The corresponding L.E.D. light will blink to indicate
position. It will
the active functions.
continue to this
Shiatsu Massage
position after the
Shiatsu is a deep kneading circular massage
power has been
turned off. If the
Shiatsu Programs
electrical supply is
Choose from 3 preset programs where the Shiatsu
massage travels up and down in a specific area of
interrupted, when
the back. To select a program, simply press the
power is restored,
button and the L.E.D will illuminate. To deselect,
the mechanism will
press the button again or press another button.
"park" or move to
Spot Shiatsu
its highest position.
While the unit is in Shiatsu massage, press either
button to stop and focus the Shiatsu action in one
place. Once the unit is operating in Spot Shiatsu,
you may adjust the mechanism position by
Caution:
holding down either button until the desired
Do Not use Spot
position is reached.
The Up Arrow will move the mechanism upwards
Shiatsu with heat for
and the Down Arrow will move it down. Once you
the back in one area
release the button, the mechanism will stop in that
for more than
place.
3 minutes.
Power Button
To turn on the massage functions, first press the
Power button. The L.E.D indicator will illuminate
and confirm your selection. To turn off the
massage functions, simply press the button again.
The L.E.D. indicator will blink while the massage
mechanism returns to its highest point and then it
will turn off.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
™
6
Rolling Massage
Rolling is like two hands or thumbs working up and
down along your spine
Rolling Programs
Choose from 3 preset programs where the Rolling
massage travels up and down in a specific area of the
back. To select a program, simply press the button and
the LED will illuminate. To deselect, press the button
again or press another button.
Partial
While the Rolling massage is moving at the area of the
back you want to focus on, press either button. The
massage heads will move up and down only in that
particular area of the back. Press arrows to adjust the
massage action up or down.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage
heads. This adjustment changes the area that is
massaged along your spine. With each press, the
massage heads will move to the next available position.
Heat
For soothing heat when massage is on, simply press the
heat button and the corresponding red L.E.D. light will
illuminate. To deselect, press the button again and the
corresponding L.E.D. light will turn off. For your safety,
heat cannot be turned on if no massage program is
selected.
Removable Flap
Remove for a more
intense back massage.
(Not pictured)
Moving Dual
massage mechanism
7