THOMSON DSC-523W Manual De Instrucciones página 39

MOTORISED 720P HD WIFI IP CAMERA
10 11
1 2 3 4 5 6
1
Open an external video file
Quick scroll forward
2
Quick scroll back
3
Playback
Stop playback
4
controls
Progress image by image
5
Start playback
6
Pause
7
Current operating day: the coloured time
8
intervals indicate the presence of videos and
their approximate start and end times
List of cameras to search: tick the cameras
9
with recordings you wish to view
Viewing windows: double-click to display one
10
or more windows and cameras simultaneously
Take a photo from the video in playback and
11
activate/deactivate sound
Type of trigger: tick the type of recordings you
12
want to search: flat (programmed), manual,
upon movement detection, by alert in general
Day you want to view
13
Position: enter the precise time from which you
14
want to view the video
To search for a video and view it:
• Click on the list of cameras on the top right of
the screen or on the cameras that you wish to
view.
• In the "type d'enregistrements" [type of
recording] area, indicate the type of recording
that you are searching for.
• In the "date d'enregistrement" [recording date]
area, indicate the day you want to view.
• Click on "Recherche" [Search]: Each camera
is listed at the bottom of the screen. The
coloured areas correspond to the videos in the
computer memory:
9
7 8 14 13 12
D - CONFIGURATION AND USE
• At the bottom of the screen, click on the
cameras for which you would like to display
the videos
• Use the playback controls to play, fast forward
or rewind, or use the "Positionner" [Position]
area to indicate the precise time with the
cursor.
To program an alert to be sent when movement is
detected, you need 2 email addresses: the address
of the sender which will be used by the camera,
and the address which will receive the alerts. The
camera uses the username and password of the
sender address to connect and send the email.
Configuration depends on the chosen email
provider's settings.
Note: the 2 email addresses can be the same (you
will simply be sending an email to yourself)
In our example, we use www.gmail.com:
sender-address@gmail.com
recipient@gmail.com receives the alerts. Both
www.thomsonsecurity.eu
addresses need to have been created beforehand.
To program email alerts for movement detection,
right-click on a camera in the list at the upper right
of the main screen or on the screen image, then
select "Paramètres caméra [Camera settings]". Then
go to "Réseau" [Network] > "Paramètres messagerie
[Message settings]":
sends the alerts,
EN EN
15