Initial Startup; Usage - vidabelle VD-7241 Manual De Instrucciones

INITIAL STARTUP

1. Install the base on a solid, stable and easy to clean surface.
2. Use the measuring cup and fill the water tank with 50 ml of fresh, clean
tap water. The measuring cup features a corresponding measuring scale.
Observe the MAX marking inside the water tank. Do not overfill the
water tank.
3. Install the facial attachment on the base.
4. Then turn the facial attachment slightly clockwise to lock. The locking
mechanism must noticeably click into place.
5. Fully unwind the mains cable and connect the mains plug to a wall socket.
The facial sauna is then ready for use.

USAGE

Warning
To avoid burns, never touch the steam valve directly.
Set up a kitchen timer ("egg timer") to avoid prolonged usage.
1. Prepare your facial skin as described under "Usage".
2. Set the switch to 2 in order to heat up the water quickly. The red indicator lamp
lights up, and steam starts to escape after approx. 5 minutes.
19