Electronic Dashboard - Snapper NXT 2346 Manual Del Usuario

Electronic Dashboard

The electronic dashboard includes an easy-to-read
electronic display and maintenance minder. The electronic
display monitors critical mower information including fuel
level, running hours, and cutting height (see Figure 3).
A
D
E
A. Total Hours and Trip Hours
B. Clock
C. Maintenance Display Modes
• Oil Change
• Replace Air Filter
• Sharpen Blades
D. Fuel Level (Full/Empty)
E. Battery Voltage (High/Low)
Display Total Hours, Trip Hours, and Clock
NOTE: Whenever you start up the unit, the Total Hours are
displayed. The Total Hours will automatically reset to 0 after
999.9.
1. Press MODE for less than 1 second to display the Trip
Hours.
2. Press RESET for greater than 3 seconds to reset the Trip
Hours to 0.
3. Press MODE for less than 1 second to display the Clock
(see Set the Clock section).
4. Press MODE for less than 1 second to return to Total
Hours.
14
I
Total Trip / Hours
F
Oil Change Air Filter Sharpen
E
The built-in maintenance minder tells you when to change
the oil, air filter, or sharpen the blades. An amber indicator
light turns on to alert you and the required maintenance is
displayed on the message panel. The electronic dashboard
also includes a digital clock.
C
AM PM
4
3
2
1
Cut Height
H
F. Height-of-Cut
G. Control Buttons
H. Message Panel
• Low Fuel
• Low Battery
• Change Oil
• Change Air Filter
• Sharpen Blades
I. Indicator Light (see Message Panel)
Total
MODE
< 1 sec
Total
RESET
> 3 sec
B
MODE
SCROLL
RESET
F
Trip / Hours
Total Trip
Trip / Hours Total Trip
www.snapper.com
G
Figure 3
/ Hours
/ Hours