trouBLEsHootInG
Problem
The device is not connected to the
power supply system
The device does not
The device is not switched on
warm up.
The device is defective
The heating blanket and the controller
On the controller
are not, or not correctly, connected to
display screen,
each other.
the letter "E" is shown
The device is defective.
CArE InstruCtIons
•
Before cleaning the heating blanket, the power plug must be disconnected from the power socket.
•
The heating blanket can be washed by hand or in the washing machine at 40° C using a
mild detergent.
•
Do not iron the heating blanket.
•
Please do not use any detergents containing chlorine.
•
Do not dry clean the heating blanket.
•
The heating blanket cannot be tumble dried.
•
Do no use any high-pressure cleaners.
•
Make sure that the controller does not come into contact with any liquids. Liquids may result in damage.
•
Never use the heating blanket while it is wet or damp. The heating blanket must not be switched on while it
is drying.
•
Let the heating blanket air dry. Do not use any auxiliary means (such as clothes pegs) to hang it up to dry.
This may damage the cables inside.
storage and regular inspection
•
Do not crumple the heating blanket. Carefully fold the product to store it.
•
Store the device in a dry place when it is not in use.
•
Allow the device to cool before you fold or roll it up.
•
Inspect the device and the power cable for possible signs of wear or damage at regular intervals.
•
Please do not use any chemical moth protection.
•
Do not place any heavy objects on the device during storage, as this may damage the electrical wiring.
•
In the event of malfunction or defects, send the device to the manufacturer.
Cause
Insert the power plug into the power
socket and switch on the device
Switch on the device
Send the device to the manufacturer
Connect the plug of the controller
the plug of the heating blanket
Send the device to the manufacturer
troubleshooting
(G)
to
(H)
DE
DE
EN
EN
FR
FR
IT
IT
ES
ES
NL
NL
RU
RU
PL
PL
SE
SE
FI
FI