Technical Specifications - Klip Xtreme Savant KPP-015 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

7. Charging the presenter

To charge the wireless presenter connect it to a USB

port of a laptop or PC or to a wall adapter using a

micro-USB cable. The battery symbol in the top right

corner will indicate when the battery is fully charged

(approximately two hours).

8. Troubleshooting

If the presenter fails to work as expected, first verify that

the recommendations mentioned below have been

followed:

• The USB receiver is correctly connected to the

computer.

• The receiver is within communication range with

the presenter (no more than 100 meters away,

depending on location.)

• If the pointer is emitting the light beam, the

receiver is recognized by the PC but the connection

is not working, or the device is unable to control

your PC, it is possible that the address code (driver)

hasn't been loaded correctly in the receiver. Please

follow these steps to solve the problem:

- Open a PowerPoint file on your PC

- Press and hold the scroll forward/backward

button on the presenter

- Turn OFF/ON the presenter while holding the

backward button, until the PowerPoint

presentation starts responding to the

back/forward function. When this process finishes

successfully it means communication has been

stablished.

Note: If the presenter is not responding after completing

the procedure mentioned above, the device needs to be

returned to an authorized service dealer for repair.