Ir Delete Function - PORSCHE DESIGN 911 Manual De Instrucciones

Exit menu
Press and hold the 'ON/Standby' key again for longer than 5 seconds to exit the 'IR learning function' menu. If the 911 Soundbar does not receive any
input instructions from the remote control within a period of 60 seconds, the menu navigation returns to normal mode automatically.
Direct selection of the signal inputs
In addition to the 'Input ' and 'Input ' function, you can directly select the signal inputs TV, DVD, AUX and Bluetooth
remote control. That means you can allocate the desired input to a key on your remote control.
While you are still in the IR learning menu , press one of the Input keys on the Porsche remote control for 3 seconds to access the direct
1 I R L
selection menu. D V D flashes in the display.
You can now allocate the 'DVD' input to a key on your TV remote control.
2
Note: If you press this key on the remote control while the speaker is in normal mode, the 911 Soundbar switches directly to the DVD input.
Press the desired key on the remote control. If the infrared [ IR ] code has been successfully memorised by the 911 Soundbar,
3
briefly in the display followed by the next input .
T V
If the code has not been memorised or if you do not press any key on your remote control within 10 seconds,
4
to indicate that no code has been memorised. then flashes again in the display and you can rememorise the code for the DVD input.
D V D
If you do not want to allocate a key to the DVD input, briefly press the 'Input ' key to manually access the TV input.
5
To allocate the TV, AUX and/or Bluetooth inputs to a key on your remote control, repeat steps 2 to 5.
6 ®
7 To exit the direct selection menu, press one of the two input keys again for 3 seconds to access the higher level IR learning menu
the 'ON/Standby' key for 3 seconds while still in the direct selection menu, the system switches from this menu to the normal mode.
briefly in the display to indicate that the IR learning mode has ended.
Note: Due to the variety of infrared codes, it is not possible to guarantee that every IR remote control signal can be learned by the 911 Soundbar.
In general, signals from radio remote controls [RF] cannot be learned.
DS_Betriebsanleitung_911_Soundbar_210x148mm_RZ_Teil_1_v19.indd 54-55

IR DELETE FUNCTION

To delete the TV remote control commands learned by the 911 Soundbar, you need to follow these steps:
1 Switch the 911 Soundbar on.
Press the 'On/Standby' key on the Porsche remote control for approx. 5 seconds.
2
when using your TV or universal
®
The display will flash
3
Press the 'Mute' key of the Porsche remote control for approx. 5 seconds.
4
The display will show
5
O K appears
appears briefly in the display
FA I
I R L . If you press
appears
F I N
.
IRL
for approx. 5 seconds. The 911 Soundbar will then switch automatically back to normal operation.
CLR
[ EN ] 911 Soundbar
54 | 55
22.09.16 17:48