Led Indicator And Buzzer Definition; Auto Dormancy/Automatic Awaken, Automatic Turnoff - Baxtran IMP05 Manual De Instrucciones

After finished pairing, other the host device (upper machine) still can pair with this thermal printer. One printer can be most allowed to pair
with 8 units upper machines (the host devices). If the ninth device will be paired with the printer, the earliest ones will be deleted from
printer paring list automatically. If this earliest device will be allowed to drive the printer again, it need to pair with the printer again.

5.4 LED INDICATOR AND BUZZER DEFINITION

IMP05 has one buzzer and two LED indicators to indicate the printer status. The LED indicators indicate current status and buzzer indicates
the changes of status.
LED indicator (Blue)
Lamp off
Flash slowly
Lamp off

5.5 AUTO DORMANCY/AUTOMATIC AWAKEN, AUTOMATIC TURNOFF

In order to save energy, prolong the using time, IMP05 printer adopts the advanced automatic dormancy, automatic awaken technology.
After turning on the Printer, if without any data sent to the printer by the host within one minute, and without pressing any buttons, the printer
will be entering to the dormancy mode and the state indicator light (RED) will be in a state of slow flash .
After dormancy, the power consumption greatly reduced, and it will not affect the using. When receiving any printing data, the printer will be
awaken automatically, without any other manual intervention.
After 2 hours, the printer does not receive any data, the printer will automatically turn off, and you should start it by manual.
28
LED indicator (red)
Bright continuously
Flash slowly
Flash slowly
Printer status
Working
Paper end
dormancy
USER'S MANUAL IMP05
Buzzer
Three beep continuously-warning
EN