Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECT THE Magistro BRAIN
1. Locate your serial number
2. Connecting to broadband
Power network Reset
Antena 2 Antena 1
3. Power up
You should see the following LED sequence:
sTEADY BLUE lights on (after short purple blink), means
Linux Os is loading
BLUE light is BLInkInG after Linux Os is loaded and
while JAVA application is loading.
STEADY GREEN lights on after JAVA application is up
and magistro is successfully connected to the cloud.
GREEN light is BLINKING then MAGISTRO doesn't
have connection with the cloud. Internet connection
(including cable) should be checked out.
RED LED indication, alarm is armed. It will change back
to steady green when alarm is disarmed
flashing RED LED, alarm has been tripped.
CREATE A USER ACCOUNT
AND REGISTER YOUR SYSTEM
Account creation
To benefit from the BfT monitoring and control service you will need to set up
your BfT account and register your magistro BRAIn. Upon registration you will
automatically get the basic free level of monitoring service.
1.
Open a browser window on your PC and go to the following URL:
magistro.bftautomation.com
2.
Click on 'Register' and follow the on-screen instructions.
Take note of your password during this process. Once your account has been set
up, go to the login page and login to your account.
screw Z-wave antenna to
Antenna1 connector.
Connect your magistro BRAIn to your
broadband router via the Ethernet
cable. The Ethernet port is located on
the back of the magistro BRAIn.
Plug the power adaptor into the mains
supply wall socket and the other end
into the control unit.
Register your Magistro BRAIN
when you first time log in to your account, you need to enter serial number of
your magistro BRAIn in pop-up form. You can find your serial number on the
back of your magistro BRAIn.
Finalize your account
Your account is set up and you are able to use BfT cloud system. Anyway, you
need to ensure that your account is fully set up so you get the most from your
BfT account.
This includes:
Account Details
make sure that you have fully completed your profile. Go to General settings in
the General widget and select Details tab.
Users
The Users section is where you add your family members which will have the
rights to use your system. Adding new user requires you to enter new user's
details and to give him/her certain rights. Rights management allows you to
permit some services for some users.
INSTALLATION/MOUNTING Magistro BRAIN
BfT provide three methods of mounting.
Wall mounting
Drill holes in the wall surface and insert the wall plugs if fixing into plaster or
brick holes. Drill two holes, fix the screws and hook the magistro BRAIn onto the
screw's heads. Make sure swivel antenna is in vertical position.
Din-rail mounting
make enough space for magistro BRAIn on your Din-rail. Hook upper fitters on
the back of your magistro BRAIn to the Din rail and press magistro BRAIn slightly
to snap lower fitters.
Table top
You can place your Magistro BRAIN on any table top. Just make sure that swivel
antenna is in vertical position.
ADDING DEVICES
Adding new devices Z-wave
Recommended distance between sensor and magistro BRAIn should be less
than one meter.
1. On magistro site, click "ADD nEw DEVICE" button in General widget and
follow wizard instructions. for Zwave devices, it is recommended that you
reset you device before adding it to the magistro network.
2. After you successfully add the device in to your magistro network go to
"NEW DEVICES" in General widget and set your device's room name and
type. This will help you to control your device easier.
TROUBLESHOOTING
Waiting for more than a five minutes and still there is no green LED light.
1. Check your Internet connection
2. Check whether you connected your network cable correctly to your
Internet router.
I forgot my password
1. Go to magistro.bftautomation.com
2. Click "forgot password" and follow screen instruction.
I can't connect any Z-wave device to my box
Check whether your antenna supplied with magistro BRAIn is correctly mounted
on Antenna 1 connector.
I have placed a device outside my house and it is not communicating with the
Magistro BRAIN. What's happening?
If you have a lot of metal in the exterior construction of your home, this could
significantly impede wireless communication. metal is an insulator of radio
signals. If your house has metal siding or a stucco finish over a metal mesh, you
may have range problems on devices outside your home communicating with
the magistro BRAIn inside.
What should I do if I am having trouble installing my device?
If you are having difficulty with the physical installation of non BfT branded
devices (Thermostats, GE switches, Blueline meter reader, etc.), please contact
the manufacturer directly for assistance.
Publicidad
