Greenlee Communications GVIS300C Guia Del Usuario página 19

User Guide
(cont'd)
3
Analyze
When a focused live fiber end-face image is shown on the GVIS300C screen, touch the "Analyze"
button (or press the button on the inspection scope) to begin automated analysis. The analysis will
run using the currently-selected IEC profile (Settings>IEC Profile).
When the analysis has finished, the fiber image will be shown with a PASS or FAIL stamp on it. Press
the "Save" button to save the analyzed image to the currently-selected project folder.
If the image does not need to be saved, press the
"Back" button (or press the button on the inspection
scope) to return to a live image.
www.GreenleeCommunications.com
19