Publicidad
Idiomas disponibles
Idiomas disponibles
Prior to performing any maintenance always unplug the entire unit.
A clogged or dirty intake screen will greatly reduce performance.
If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake.
If less flow is desired, adjust it with the flow control. Never restrict the pump's intake.
To clean the pump, remove the front plate and the impeller. Use a small brush or stream of water to remove any debris.
CAUTION: The pump shaft cannot be removed.
IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:
•
Check the circuit breaker and try another outlet to ensure the pump is getting electrical power.
NOTE: always disconnect from electrical outlet before handling the pump.
•
Check the pump discharge and tubing for kinks and obstructions. Algae build up can be flushed out with a garden hose.
•
Check the intake screen to ensure it is not clogged with debris.
•
Remove the pump inlet to access the impeller area. Turn the impeller to ensure it is not broken or jammed.
•
If the impeller area is encrusted with minerals or corrosion, gently scrape the area clean.
•
If your pump has been idle for an extended period, it may be necessary to apply a drop of light oil to the shaft and spin the impeller by hand until it turns
freely.
•
Monthly maintenance will add to your pump's life.
Please read the WARNINGS and CAUTIONS before removing or replacing the UV bulbs.
4 Times A Year:
Wait for the Unit to cool off before wiping the Quartz sleeve with a clean cloth and rinsing with clean water only - never use chemicals.
`
Once Every Year:
Replace UV bulb (#7) once every year for optimal water clarity.
To remove quartz tube (#8) you must gently push it left/right and up/down as you pull to loosen it.
Once it starts to move you can rotate it as you pull to remove it.
Add a small amount of non-toxic lubricant inside rubber seal (#9) before re-installing quartz tube (#8).
Rotate the quartz tube as you press on it until it bottoms out on the pump.
Ensure top surface of rubber seal (#9) is same level of thread. Then re-install the seal nut (#10).
Allowing the UV Unit to freeze may result in breakage to the quartz sleeve and bulb. Winterize when water temperatures reach 40° F. Keep Products safely
packed away until spring when the everyday water temperature rises to 40° F or higher.
To winterize the UV:
-Remove all plugs from the electrical outlets.
-Set the UV Unit aside and allow it to thoroughly cool.
-Dry and wipe each part within the Unit with a dry clean cloth. Remember! Do not touch the bulb with your bare fingers!
-Put the UV Unit back together.
-Store the Unit in a safe place to prevent breaking or falling off a shelf.
Each Beckett Corporation ("Beckett") product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth below. The
Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows:
Product Type or Name
Pump Models:
FR Series, DP800-1800, G Series, W Series ............2 Years
UL6500A; XL-6500A............................ 2 Years
Other Pump Models............................. 1 Year
Pre-Formed Poly Ponds....................................... 15 Years
Waterfall Weir & Skimmer...................................... 5 Years
APPLICATION: The warranty covers only properly installed and maintained Beckett products and is limited to application at normal temperature 32º F to 86º F, (0º C to 30º C) pumping fluids
with a specific gravity up to 1.1 and with a pH range of 5 to 9 (fresh water). Other liquid applications and extreme temperature uses must be approved in advance by Beckett. The warranty
does not apply to or cover damages or defects caused by external causes, including, but not limited to, improper or faulty installation or unauthorized modification, lightning, electrical surges,
abuse, misuse or abnormal use or misapplication, including use in a manner inconsistent with the product's intended function. The purchaser is responsible for determining the suitability of the
product for its intended use. If products are damaged in transit, a claim should be filed with the carrier.
REMEDY: If there has been a failure to conform to the warranty, Beckett will, at Beckett's option, repair, replace or issue a credit or refund for the particular nonconforming product or part.
Repair, replacement, credit or refund, at Beckett's option, is the exclusive remedy in the event of a failure to conform to the warranty. Warranty claims must be made within 3 months after
expiration of the applicable Warranty Period.
ADMINISTRATION: Warranty claims must be made by calling Beckett Corporation, Customer Service Dept., telephone (866) 466-4319. Proof of Purchase is required and a $ 5.00 shipping
and handling fee applies to all warranty replacements.
INSTALLATION, REMOVAL AND/OR SHIPPING CHARGES: The warranty does not cover any costs associated with the installation, removal or shipping of products subject to warranty
claims.
DISCLAIMER AND LIMITATION: THE EXPRESS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES,
WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. TO THE FULL EXTENT PERMITTED BY LAW, BECKETT EXPRESSLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF IMPLIED WARRANTIES CANNOT BE
DISCLAIMED, ALL SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY.
BECKETT DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES EXPRESSLY SET FORTH IN THIS WARRANTY. IN NO EVENT SHALL BECKETT BE LIABLE OR RESPONSIBLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. BECKETT'S AGGREGATE LIABILITY UNDER THIS WARRANTY OR WITH RESPECT TO ANY PRODUCT COVERED HEREBY,
UNDER ANY LEGAL THEORY, SHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE NONCONFORMING PRODUCT. THE LIMITATIONS CONTAINED IN THIS PARAGRAPH
SHALL NOT APPLY TO INJURY TO THE PERSON.
Some States do not allow the exclusion or limitation of incidental or consequential damages or exclusions or limitations on the duration of an implied warranty, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from State to State.
FOR YOUR RECORDS:
Date of Purchase __________________________________
Model Number __________________________________
Name of Dealer __________________________________
PLEASE KEEP RECEIPT IN CASE OF WARRANTY SERVICE.
Warranty Period
MAINTENANCE
WINTERIZING
LIMITED WARRANTY
Product Type or Name
Liner Material:
35 mil PVC.........................................20 Years
40 mil EPDM.......................................20 Years
20 mil PVC.........................................15 Years
UV9/M130UV Filter............................... 1 Year
All Other Beckett Products & Light Bulbs................90 Days
Warranty Period
BECKETT CORPORATION
3321 E. Princess Ann Rd.
Norfolk, Va. 23502
www.beckettpumps.com
Toll Free: 1-866-466-4319
© 2012 BECKETT CORPORATION All Rights Reserved
Derechos Reservados / Tous droits réservés
Ensure top
surface of rubber
seal is same
level of thread
Publicidad
