60 litre absorption fridge
12 V – 220/230 V - gas
OPERATING
INSTRUCTIONS
Read these instructions through carefully before
installing and activating the appliance.
It is important to always keep the instruction booklet for the
appliance. These warnings regard your safety and that of others.
You should be aware of their content before installation and
activation.
Never use the appliance with more than one energy source.
The appliance exclusively designed for preserving food or drink. It
is designed and built for use by adults. Its handling by children,
to play with, is dangerous. Any modifications to the electrical or
gas equipment must be done by qualified persons. Work
entrusted to non-qualified persons may give rise to material or
physical damage.
Contact the manufacturer's technical support service or a service
approved by the manufacturer and demand only genuine spare
parts. Before installation ensure the technical data on the
identification plate match the actual specifications.
Heat extracted from food and drink by the appliance must be able
to freely disperse into the environment. Bad upper, lower or rear
ventilation in the appliance leads to decreased refrigeration
performance due to bad functioning of the absorption unit.
Before proceeding with routine defrosting, always unplug the
appliance from the mains and firmly close the gas canister tap.
Clean the inside and outside with lukewarm water a neutral, non-
abrasive and odourless cleaning product. Rinse in clear water and
dry.
The fridge inside temperature may vary according to the
surrounding temperature, fridge location, how often the lid is