Technical Data; Performance Specifications - LD Systems LDZONEX1208 Manual De Usuario

TECHNICAL DATA

Item number
Product type
General data
Audio inputs
Audio outputs
Logic inputs
Logic outputs
Remote bus
Connectors
LEDs
Front panel controls
Rear panel controls
Expansion slots
Cooling
Power supply
Power supply connector
Operating voltage
Mains fuse
Mains OFF-ON inrush current
Power consumption,
idle mode
Max. Power consumption
Operating temperature
Width
Height
Depth
Weight
Rack distance to the next
device (height)
Rack depth (required)

Performance specifications

Nominal input sensitivity
Nominal input clipping
Harmonic distortion (THD+N)
Intermodulation distortion
(IMD), SMPTE:
Frequency response
Input impedance
LDZONEX1208 / D
DSP audio matrix for fixed installation
12 balanced mic/line inputs + 1 remote bus audio input
8 balanced line outputs
8 GPI - activation via ground connection.
8 GPO – modes: LED (3 mA) or sink (300 mA), per output selectable
Yes
Inputs/outputs: 3-pole terminal block, pitch 3.81 mm;
micro USB B service connector, remote IN RJ45, Ethernet RJ45
ZoneX1208D: Dante Primary and Secondary RJ45
Front: "POWER", "NETWORK", "REMOTE", inputs 1 – 12 and outputs 1 – 8: White signal LED, red clip LED
No
Mains ON/OFF, "IP RESET"
for Ethernet (ZONEX1208) or Ethernet + Dante (ZONEX1208D) cards
Passive convection cooling
Wide-range switch mode power supply
3-pole power supply socket (IEC)
90 – 240 V AC; 50/60 Hz
T2.5 A L / 250 V
21A
23 W
60 W
0 °C ... +40 °C (max. 60 percent relative humidity)
19" rack (483 mm)
1 HE (44.5 mm)
315 mm (with terminal blocks)
3.8 kg
1 HE
350 mm
-22 dBu (sine wave, 1 kHz, max. gain)
+20 dBu (Sine wave, 1 kHz)
<0.003 percent (Line IN – OUT, +13 dBu signal, 20 Hz – 20 kHz, gain 0 dB)
<0.01 percent (-10 dB under clip), analyzer bandwidth 90 kHz
15 Hz – 22 kHz (+/-0.15 dB)
Line: 4 kOhm (balanced)
25