Auto Scan; Channel Scan; Channel Setup - Optex ORT 8820 Instrucciones De Uso

2.1

Auto Scan

When you enter to "Auto Scan" menu, there will display
the screen like below:
1 Firstly please select the country in System Setup
Menu / Region and Time / Region
2 In "Scan Mode" item, press [Left/Right] key to
select scans all channels or just scans free
channels.
3 Moving the highlight to "Search" item and press
[OK] key to start scanning.
4 In the "Auto Scan" menu, press [Exit] key to draw
back from the scanning.
2.2

Channel Scan

When you enter to "Channel Scan" menu, there will
display the screen like below:
1 There is two mode. You can scan channel by
channel or by frequency".
Specifications subject to change without notice
2 When scan band is UHF, the range of Ch No. is
from 13 to 61. When scan band is VHF, the
range of Ch No. is from 1 to 12.
3 When you complete your modification, move
highlight to "Search" item and press [OK] key,
then it will begin to scan.
4 In the "Channel Scan" item, press [Exit] key to exit
the scanning and save the current parameters.
2.3

Channel Setup

When you enter to "Channel Setup" menu, there will
display the screen like below:
1 You can see the channel information like the
picture displaying
2 Move the [Up/Down] key can move the highlight
to select the channel.
3 When press [OK] key again, you can see the
window like below:
5 Input PID information,then move highlight to
"Search" item and press [OK] key, then it will
begin to scan.
13
Menu Operations
Preliminary Confidential Proprietary
M3330 User Manual