Hoover Robo.com 2 Manual Del Usuario página 12

MAINTAINING YOUR ROBO.COM² CLEANER
Cleaning the Floor Brushes
Clean the Floor Brushes regularly to maintain maximum cleaning performance.
1. Turn Robo.com² off and remove from the Charger Base Station.
2. Turn the Robo.com² over.
3. Rotate the Floor Brush assembly carefully and using scissors cut and remove any tangled threads or hair
etc.
4. Use the Multi-purpose Cleaning Brush to remove any excess dust.
Replacing the Floor Brushes
1. Switch the Robo.com² off and turn the Robo.com² over.
2. Pull the Floor Brush Release Latch.
3. Lift the Floor Brushes Retainer.
4. Remove both Floor Brushes.
5. Clean the recess that the Floor Brushes sit.
6. Refit the new Floor Brushes, ensuring they sit correctly.
7. Close the retainer ensuring it locks.
Cleaning the Drive Wheels
1. Switch the Robo.com² off and turn the Robo.com² over.
2. Remove any dirt or hair trapped in the wheels.
3. Clean the wheels with a dry cloth.
4. Check that the wheels can rotate freely.
* Certain Models Only
** May vary according to model
RoboCom2Manual2011__GB.indd 11
GB
14/07/2011 13.40.12