Aqua Medic easy line 90 Manual De Instrucciones página 12

7. Important Notes
- Connection: Connect the reverse osmosis unit only to cold water supply. Higher temperatures
increase the pure water production but at temperatures above 40 °C, the membrane will be
destroyed.
- Stopping the unit: If you stop the unit, always close the tap water supply. If you run the unit
automatically with a solenoid valve, switch the valve between pre-filter and module. Take care
that waste water and pure water can flow away freely.
- Disconnection of the unit: If you want to disconnect the unit for a longer period than 6
weeks, you should add Aqua Medic disinfection liquid into the module housing. If the unit is
started again, flush it for 15 – 20 min. We recommend flushing also after shorter periods of
stopping.
- Storage: The unit has to be stored at temperatures above 0° C. Freezing would destroy the
membrane.
- Temperature: At low temperatures in winter, the permeat production slows down.
8. Warranty
Should any defect in material or workmanship be found within twelve months of the date of
purchase AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part
free of charge – always provided the product has been installed correctly, is used for the purpose
that was intended by us, is used in accordance with the operating instructions and is returned to us
carriage paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss. Please note that the
product is not defective under the terms of this warranty where the product, or any of its
component parts, was not originally designed and / or manufactured for the market in which it is
used. These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance. Before calling your dealer please ensure
you have read and understood the operating instructions. If you have any questions your dealer
cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
12
- Technical changes reserved – 11/2015