Publicidad
6
Basic Operation
Introduction
Congratulations on your purchase of the
Alpine SEA-8081 Digital Remote Control
Security System. The SEA-8081 Security
System features the latest in Alpine technol-
ogy and design.
Please read this manual carefully before
using your SEA-8081 Digital Remote Control
Security System. The operation description
is covered in pages 16 – 196. For those who
wish to take full advantage of the features
and conveniences provided with the SEA-
8081, please refer to pages 198 – 236.
The SEA-8081 consists of two major
components: 2 remote control transmitters
and a main unit.
The remote control transmitter allows you to
turn the system's protection on and off from
outside the vehicle. In addition to arming and
disarming the security system, the remote
control can instruct the security system to
lock and unlock the factory installed door
locks, flash the parking lights, and/or
illuminate the dome light. The remote control
can also be used to control external devices
such as an electronic trunk release.
The main unit, usually mounted under the
dash or seat, is connected to the vehicle's
wiring. If any sensors are triggered while the
system is armed, the system will immediately
sound the siren and flash the parking lights to
attract attention to your vehicle and to warn
the potential thief to stay away.
Note: Door locks, parking light flash, dome
light illumination, and trunk release
may be optional. Consult your Alpine
dealer for more information.
English
English
Publicidad
