AKO UWS 75 RD Instrucciones De Montaje Y Uso página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
5. Operation
Do not use the device as a changing table heater.
The heating device is designed to be activated externally, e.g. using a light switch, motion detector, etc.
The radiator heats the objects or persons upon which/whom it is directed without also directly heating the
indoor air.
The radiation angle of the heating device can be tilted downwards from the horizontal position by approx. 25°.
Note! Adjustments must only be made when the device is fully cooled. Danger of burns!
6. Faults
If the infrared radiator does not give off any heat, please check that the device and the circuit breaker in the
power distribution system are switched on.
If you cannot remedy the fault, please contact your electrical retailer. If required, you can also contact the
Glen Dimplex Deutschland GmbH service hotline with any queries.
Telephone: +49 (0) 9221 709-564
Fax:
+49 (0) 9221 709-589
To process your order, we require the product number (E no.) and the device's production date (FD) of the
device. This information is listed on the type plate of the heating device.
Repairs and corrective measures must only be carried out by a qualified electrician.
7. Changing the Heating Element
A heating element must only be changed by a specialist technician! Do not touch the heating element or re-
flector with bare hands. Use a cloth to protect the surface.
− Disconnect the device from the power supply and allow it to cool.
− Loosen the screws on both cover caps and remove the caps.
− Disconnect the electrical heating element connections and change the heating element.
Carry out assembly in reverse order.
8. Cleaning
To clean the device, first disconnect it from the power supply and allow it to cool.
Note! Do not touch the reflector or heating element with bare hands.
External device surfaces can be wiped with a damp cloth and domestic cleaner; they must be dried after-
wards. Do not use scouring agents or polishes.
Dust gathering inside the device can be removed using a brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a specialist.
9

Publicidad

Tabla de contenido
loading

Productos relacionados para AKO UWS 75 RD

Tabla de contenido