Specifications; Caractéristiques Techniques; Technische Daten; Especificaciones - dbx 1046 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

®
Specifications / Spécifications techniques
Technische Daten / Especificaciones
Input / Entrée / Eingang / Entrada
Connectors:
Female XLR and 1/4" TRS (Pin 2 and tip hot)
Connecteurs
XLR femelles et jacks stéréo 6,35 (point chaud = borne 2 et pointe)
Anschlüsse:
XLR-Buchsen weibl. und 6,3-mm-Stereoklinkenbuchsen (Inphase = Stift 2 bzw. Spitze)
Conectores:
Hembra de XLR y jack estéreo 6,3 mm (espiga 2 y punta = en fase)
Type:
Electronically balanced/unbalanced, RF filtered
Type :
Symétrie, asymétrie électroniques, filtrées contre les interférences radio
Schaltung:
Elektronisch symmetriert/asymmetrisch, HF-geschützt
Tipo:
Electrónicamente balanceado/desbalanceado, con filtro RF
Impedance:
Balanced > 50 kΩ, unbalanced >25 kΩ
Max Input Level:
> +24 dBu balanced or unbalanced
CMRR:
40 dB; Typically >55 dB at 1 kHz
Output / Sortie / Ausgang / Salida
Connectors:
Male XLR and 1/4" TRS (Pin 2 and tip hot)
Connecteurs :
XLR mâles et jacks stéréo 6,35 mm (point chaud = broche 2) et bornier
Anschlüsse:
6,3-mm-Stereoklinkenbuchsen, XLR-Buchsen männl. (Inphase = Stift 2 bzw. Spitze)
Conectores:
Clavijas jack estéreo 6,3 mm, XLR macho (espiga 2 y punta = en fase)
Type:
Servo-balanced/unbalanced, RF filtered
Type :
Symétrique, asymétrique, filtrées contre les interférences radio
Schaltung:
Servosymmetriert/asymmetrisch, HF-geschützt
Tipo:
Balanceado/desbalanceado, con filtro RF
Impedance:
Balanced 60Ω, unbalanced 30Ω
Max Output Level:
> +21 dBu, >+20 dBm balanced/unbalanced
System Performance/ Caractéristiques système / Audiodaten / Datos audio
Bandwidth:
20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response:
0.35 Hz to 200 kHz, +0/-3 dB
Noise:
< -94 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:
> 118 dB, unweighted
THD+Noise:
0.009% typical at +4 dBu, 1 kHz unity gain
0.09% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
IMD:
< 0.1% SMPTE
Interchannel Crosstalk:
< -85 dB, 20 Hz to 20 kHz
VCA:
dbx V2™
Stereo Coupling:
True RMS Power Summing
Compressor / Compresseur / Kompressor / Compresor
Threshold Range:
-40 dBu to +20 dBu
Ratio:
1:1 to ∞:1
Threshold Characteristic:
Selectable OverEasy® or hard knee
Attack/Release Characteristic: AutoDynamic™
Attack Time:
Program-dependent, typically 15ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Release Time:
Program-dependent, typically 125 dB/sec
Output Gain:
-20 to +20 dB
Limiter I Limiteur / Limiter / Limitador
Threshold Range:
+4 dBu to +22 dBu (off)
Ratio:
∞:1
Limiter Type:
PeakStopPlus™ two-stage limiter
Stage 1:
Instantaneous Transient Clamp™
Attack Time:
Zero
Release Time:
Zero
Stage 2:
Intelligent Predictive Limiting™
Attack Time:
Program-dependent, typically <5 msec
Release Time:
Program-dependent, typically 22 dB/sec
Function Switches / Touches de fonction / Funktionstasten / Conmutadores de funciones
OverEasy®:
Activates the OverEasy® compression function.
Active la fonction compression OverEasy®.
Schaltet zwischen OverEasy®- und Hard Knee-Kennlinie um.
Activa la función de compresión OverEasy®
42

SPECIFICATIONS

Publicidad

Tabla de contenido
loading

Tabla de contenido