Tabla De Contenido; Downdraft Ventilation - Wolf ICBDD36 Guía De Uso Y Mantenimiento

DOWNDRAFT VENTILATION

Contents
Safety Precautions
2
Downdraft Features
3
Downdraft Operation
4
Care Recommendations
4
Troubleshooting
5
Wolf Warranty
5
|
2 English
Customer Care
The model and serial number are printed on the enclosed
product registration card. Both numbers are also listed on
the product rating plate. Refer to page 3 for rating plate
location. For warranty purposes, you will also need the date
of installation and name of your authorized Wolf dealer.
Record this information below for future reference.
SERVICE INFORMATION
Model Number
Serial Number
Date of Installation
Certified Service Name
Certified Service Number
Authorized Dealer
Dealer Number
Important Note
To ensure this product is installed and operated as safely
and efficiently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
indicates a situation where minor injury or product
CAUTION
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
SAFETY PRECAUTIONS
IMPORTANT INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
• Read this use & care guide carefully before using
your new downdraft ventilation to reduce the risk
of fire, electric shock or injury to persons.
• Ensure proper installation and servicing. This
appliance must be properly installed and grounded
(earthed) by a qualified technician.
• Warranty service must be performed by Wolf
factory certified service.
• Installation work and electrical wiring must be done
by qualified person(s) in accordance with all appli-
cable codes and standards, including fire-rated
construction codes and standards.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a) Use this unit only in the manner intended by
the manufacturer. If you have questions, con-
tact the manufacturer.
b) Before servicing or cleaning unit, unplug the
appliance or switch power off at service panel
and lock the service disconnecting means
to prevent power from being switched on
accidentally. When the service disconnecting
means cannot be locked, securely fasten a
prominent warning device, such as a tag, to
the service panel.
GENERAL SAFETY PRECAUTIONS
• Sufficient air is needed for proper combustion and
exhausting of gases through the flue (chimney) of
fuel burning equipment to prevent back drafting.
• Follow the heating equipment manufacturer's
guideline and safety standards and the local code
authorities.
• Do not operate any fan with a damaged cord or
plug. Discard fan or return to an authorized service
facility for examination and/or repair.
• This appliance must be grounded (earthed).
CAUTION
For general ventilating use only. Do not use to
exhaust hazardous or explosive materials and
vapors.
• Ducted fans must always be vented to the
outdoors.
• To reduce the risk of fire, use only steel ductwork.
• Do not install this downdraft with the activating
switch directly behind a burner or element. The
minimum distance between the switch and edge of
the burner should be 102 mm.
• Do not wear loose-fitting or hanging clothing when
operating this appliance. It may be ignited by
burners or elements on the cooktop.
• Children should not be left alone or unattended in
the area where this appliance is in use.
CAUTION
To reduce the risk of fire and properly exhaust air,
be certain to duct air outside. Do not vent exhaust
air into spaces within walls or ceilings or into
attics, crawl spaces or garages.