Hughes & Kettner TubeTools Tubeman Guía De Inicio Rápida página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

TUBEMAN-MANUAL
1. INTRODUCTION
2. JACKS AND CABLE CONNECTIONS
3. SWITCHES AND CONTROL FEATURES
4. TECHNICAL SPECIFICATIONS
SAFETY GUIDELINES
Please keep in mind that the tube inside the unit operates on
high voltage. Do not open the TUBEMAN
serviceable parts inside. For service or repairs take the device
to a certified technician only.
1. INTRODUCTION
Congratulations and thank you for purchasing the Hughes &
Kettner
®
TUBEMAN
®
.
The TUBEMAN
®
has been designed specifically for recording elec-
tric guitar without the hassles of miking, but with authentic tube
tone and full, rich cabinet sound.
The TUBEMAN
®
has a special frequency- compensated output for
connecting directly to a recording console. This output also lets
you use the TUBEMAN
®
as a backup amp live on stage straight
into the mixing console. A second output allows the TUBEMAN
to serve as a preamp for connecting to a separate power amp and
guitar cabinet, or to the FX RETURN of an existing guitar amp. The
three footswitches make channel-switching easy, and the ten
control knobs offer a broad range of tonal control. With its unique
features and no-compromise quality, the TUBEMAN
the right tools to expand the scope of your musical expression.
2. JACKS AND CABLE CONNECTIONS
2.1 INPUT:
Connect this TUBEMAN
input jack to the output of your guitar.
®
2.2 To Mixer:
This circuit features an integrated Red Box
put to the input of a mixing console or recording device.
2.3 To Guitar Power Amp:
This output delivers an unfiltered signal which you can route direc-
tly to a discrete power amp and guitar cabinet, or to the power
amp of your guitar combo amp, for example via your amp's FX
RETURN. It is also possible to patch this signal to a standard guitar
amp's instrument input, but we do not recommend using the new
TUBEMAN
recording. (If you're looking for the ultimate pedal to use in-line
between your guitar and the instrument input of your existing
amp, we recommend the new Hughes & Kettner TUBE FACTOR™,
which is optimized specifically for that purpose.)
2.4 Socket for the AC power supply.
Use only the Hughes & Kettner
3. SWITCHES AND CONTROL FEATURES
3.1 Channel 1:
Press this button to activate the TUBEMAN
3.2 Channel 2:
Press this button to activate the TUBEMAN
3.3 Channel 3:
Press this button to activate the TUBEMAN
3.4 Volume CH 1:
This knob controls the Clean channel volume level.
3.5 Gain CH 2:
This knob controls the Crunch channel distortion level.
3.6 Volume CH 2:
This knob controls the Crunch channel volume level.
3.7 Gain CH 3:
®
. There are no user
This knob controls the Lead channel distortion level.
3.8 Voicing CH 3:
This knob controls the overall tonal balance of the Lead channel.
3.9 Volume CH 3:
This knob controls the Lead channel volume level.
3.10 EQ, Bass, Mid and Treble:
These EQ controls affect all channels.
3.11 Master Volume:
This knob controls the overall volume of the TUBEMAN
4. TECHNICAL SPECIFICATIONS
®
Input
Impedance
Min. level
Nominal level
Max. level
®
gives you
Output to Guitar Power Amp
Impedance
Max. level
Output to Mixer
Impedance
Max. level
current consumption
Max. power draw
®
Pro. Connect this out-
Tube type
Width
Height
Depth
Weight with power supply
®
this way. The new TUBEMAN
®
PSA 0812.
1 Mohm
-40 dB
-26 dB
+17 dB
220 ohms
+12 dB
220 ohms
+6 dBMax.
540 mA at 13.1 V
7.1 VA
1 ECC 83 or 12AX7A
220 mms / 8 5/8 inch
80 mms / 3 1/8 inch
215 mms / 8 inch
2.05 kg / 4 lbs.
®
is optimized for direct
®
Clean channel.
®
Crunch channel.
Lead channel.
®
®
.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido