Reinstall Bottom Panel And Filters; Fluorescent Lamps - Venmar ESB10 Instrucciones De Instalación, Uso Y Cuidado

8. REINSTALL BOTTOM PANEL AND FILTERS

Reinstall the bottom panel, using the retaining screw previously removed in
step 4 plus 4 others from parts bag. Refer to illustration beside.
Then, reinstall filters.

9. FLUORESCENT LAMPS

This hood has fluorescent lamps containing mercury. Dispose of appropriately, according to local laws and requirements.
This range hood must use compact fluorescent lamps (120 V, 13 W, PLC13, 2700 K with G24q-1 base) (included).
NOTE: The range hood is shipped with both fluorescent lamps packed behind the light diffuser.
1. To access fluorescent lamps, remove the light diffuser by pushing on its both tabs and pulling it down.
2. To install the fluorescent lamps, slide their 4 prongs into their corresponding holes in their socket until secured. Reinstall the
light diffuser.
1
HO0099
In order to prevent the risk of personal injury, the fluorescent lamps must be cooled down before removing them.
To remove fluorescent lamps, remove the light diffuser and pull fluorescent lamps out of their socket.
NOTE: Some fluorescent lamps may produce a yellowish lighting on first usages. This temporary effect will disappear out in
time by itself.
! WARNING
2
! WARNING
- 8 -
HO0092