Chauvet Professional RDM2 GO Guía De Referencia Rápida página 2

RDM2go™ QRG
About This
Guide
Disclaimer
Safety Notes
Contact
The RDM2go™ Quick Reference Guide (QRG) has basic product information such
as connection, menu options, and DMX values. Download the User Manual from
www.chauvetprofessional.com
The information and specifications contained in this QRG are subject to change
without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power by unplugging it.
·
DO NOT leave any flammable material within 50 cm of this product while
operating or connected to power.
·
CAUTION: When transferring product from extreme temperature environments,
(e.g. cold truck to warm humid ballroom) condensation may form on the internal
electronics of the product. To avoid causing a failure, allow product to fully
acclimate to the surrounding environment before connecting it to power.
·
The product is not intended for permanent installation.
·
DO NOT operate this product outdoors or in any location where dust, excessive
heat, water, or humidity may affect it. (IP20)
·
DO NOT operate this product if the housing, screen or cables appear damaged.
·
DO NOT connect this product to a dimmer or rheostat.
·
ONLY connect this product to a grounded and protected circuit.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
·
Caution: Using product in lower temperature environments may affect battery
life or battery efficiency.
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. From inside the U.S., UK, Ireland,
Mexico, or Benelux, use the information in
for more details.
Contact Us
2
at the end of this QRG.
EN