Descargar Imprimir esta página

Honeywell RCWL301A Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Wireless Converter / Extender / Push and Door Contacts
The converter can be used as a standalone wireless push or as an interface for
door contacts.
Open the bell push/converter
Using a ball point pen press at point A shown in fig 8. Remove the cover. Undo the
retaining screw B and remove the back of the push.
B
Fig. 8
Use the push/converter/extender with door contacts
Connect the push/converter/extender to the door contacts using the bell wire supplied.
Fit the Push/Converter/Extender Battery
Insert the CR2032 coin cell. Ensure the face marked '+' is uppermost (Fig. 9).
CR2032
CR2032
Fig. 9
When the door contacts (a normally closed circuit) are separated/opened, the
chime will make a fixed alert sound and the icon assigned to the converter will
flash.
Mount the door contacts to the door and door frame
Fix the push/converter/extender
Mount using either the double-sided adhesive pad or the screws provided. (See Fig.
10). Test your converter before mounting. Avoid mounting to metal structures.
Fig. 10
CABLE ENTRY GROMMET
Important note: Additional wiring can be brought into the push through the grommet in
the back of the push. Once the grommet has been pierced or removed, we
recommend that the push is mounted indoors.
Additional functions for Wireless Converter/Extender
It can be used to interface with an existing wired doorbell system or any of the
following:
• A standard wired bell push
• A lit bell push and transformer
• A door or window contact
• Any device with N/O or N/C, voltage free contacts
• Any device which generates appropriate control signal
< 24V (AC or DC)
See typical connections (C1-7)
Diagram Application
wired bell push or 'normally
C1
open' switch/contacts
door/window contact, 'normally
C2
closed' switch/contacts
a lit push (with transformer) when
C3
switch is closed, chime will sound
landscape push/converter -
C4
terminal positions
a typical wired bell or chime circuit -
C5
transformer powered
converter connected to a wired bell
C6
or chime -transformer powered
converter connected to a wired bell
C7
or chime circuit - battery powered
A
M27168
Operation
when switch is closed,
chime will sound
when switch is opened, chime
will make a fixed 'ALERT' sound
when switch is closed,
chime will sound
when push is operated,
chime will sound
when push is operated,
chime will sound
3
Installation instructions–RCWL301A
69-2139EFS—03

Publicidad

loading