System Features - Samson Audio EXPEDITION PRO XP100 Manual Del Usuario

The Samson Expedition Pro system uses state-of-the art
technology to bring a revolutionary new degree of flex-
ibility and portability to professional audio. Its main fea-
tures include:
• A built-in telescoping handle and locking wheels that
make it easier than ever before to transport your audio
system.
• All Expedition Pro enclosures are lightweight and com-
pact yet exceptionally durable and
Injection-molded with Polypropylene, they feature sub-
stantial internal bracing to support a nearly 1/2" thick side
wall construction, making them strong and rigid enough
to allow maximum energy to be delivered to the sound
output.
textured finish makes for a rugged speaker
that will deliver dependable
the most demanding
• The low frequency section includes a custom designed
Kevlar-impregnated 12" low frequency driver with a
2.5" Kapton Former voice coil and 50 ounce barium fer-
rite magnet for accurate and super-tight bass response.
• A high frequency section that delivers clear, sweet top
end thanks to its 1" compression driver with a specially
designed phenolic diaphragm, along with a phasing plug
for linear response and an elliptical wave guide horn
design that reduces nearly all sonic diffraction.
• A tilt position that allows the Expedition Pro to be used
as an onstage wedge monitor.
• Integral 1 3/8" pole-mount receptacle and convenient
fly points allow the Expedition Pro to be pole-mounted or
"flown" using standard PA hardware.
• The XP100 is a passive cabinet that can be used with any power amplifier rated at
up to 250 watts into 8 ohms. It requires no power and provides dual Speakon™
and 1/4" connectors that allow multiple XP100s to be
extended coverage is required.
• The XP200 contains dual power amplifiers and an active crossover. Operating in
a biamped configuration, one power amp drives the low
with 150 watts of power and the other drives the high
50 watts of power. The active crossover uses an advanced Linkwist-Riley constant
phase filter that provides a steep rolloff of 24 dB per octave to reduce sonic dis-
tortion at the crossover frequencies. Dual balanced XLR connectors allow daisy-
chaining of multiple Expedition Pro enclosures, and a switchable limiter circuit
assures a clean output even when you're pushing the XP200 to maximum levels.
In addition, there are three stages of speaker protection, including relay switching
for power on and off.
• The XP300 includes all the features of the XP200, and adds a flexible four-channel
stereo mixer that provides two monophonic and one stereo mic/line channels
with dual XLR and 1/4"
tors allow you to hook up an external cassette or CD player.
nel includes two-band
3 3

System Features

In addition, a steel grill and scuff-resistant
environments.
connectors. In addition, separate dual phono connec-
equalization and independent volume
roadworthy.
enclosure
performance in even
daisy-chained where
frequency section
frequency section with
Each mixer chan-
control,