Stacked ISO mount units provision
1. Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure A)
2. Slide the Stacked ISO units into the
bracket/housing assembly and secure
the units to the assembly using the
screws supplied with the units.
(Figure B)
3. Snap the Double DIN trim plate into the
radio housing. (Figure C)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 95-8208
5
(Figure A)
(Figure B)
(Figure C)