DJ-Tech DIF-2S MKII Manual Del Usuario página 6

1. POWER indicator
LED will be lit when the unit is POWER ON.
2. Input selector
Assign the input source of CH1 & CH2.
3. MIC level knob
Adjust the microphone input level.
4. TRIM level knob
Adjust the input level for CH1 & CH2.
5. Channel EQ knob
Adjust the EQ (HI/MID/LOW) for CH1 & CH2.
6. PHONES level knob
Adjust the headphones output level.
7. Channel Fader curve adjustment knob
Adjust the shape of the channel fader cur\/e
from a fast cut or to a slow fade.
8. Channel Fader reverse switch
Press to reverse the direction of the channel
fader.
9. CUE button
Select the channel(s) to be monitored.
10. Channel Fader
Adjust the volume for CH1 & CH2.
11. Crossfader
Mix tre sound from CH1 & CH2.
12. PFL/MASTER selector
Determine the level meter mode.
"PFlL' - left side of the meter will indicate
monaural level of CH1, and right
side of the meter will indicate
monaural level of CH2.
"MASTER" - show the master output level.
13. PFL/MASTER level meter
Show the level depending on the position of
PFL/MASTER selector.
14. MASTER level knob
Adjust the master output level.
15. BOOTH level knob
Adjust the booth output level.
16. Crossfader curve adjustment knob
Adjust the shape of the crossfader curve from
a fast cut for scratching or to a slow fade for
mixing.
17. Crossfader reverse switch
Press to reverse the direction of the crossfader.
18. BOOTH output jack (RCA)
Connect to your active speakers.
19. MASTER output jack (1/4" stereo)
Connect to your active speakers.
20. POWER switch
Turn this ur.it power ON/OFF.
5J'-?9Gh
A. FRONT, REAR AND TOP PANELS
POWER connector
Connect to the main AC power with the power cord.
(package included)
DVS SEND jack (RCA)
Connect to the inputs of your DVS audio interface.
DVS RETURN jack (RCA)
Connect to the outputs of your DVS audio interface.
GND terminal
Connect to the ground leads of your turntable.
PH/LN selector
When connecting the turntable with moving magnet
cartridge, be sure the switch is in "PH" position.
When using the line level device, select "LN". Always
be sure the main power is OFF before switching.
PH/LN inputjack (RCA)
Connect to your turntable or line level device.
CD input jack (RCA)
Connect to your CD player.
MIC inputjack (1/4")
Connect to your microphone.
Crossfader dead space adjustment
Adjust the dead space of crossfader from 3mm to
less than 0.5mm.
"|<< CUT" - adjust the dead space of CH1, turn
arit'clockwise to maximize the dead
space and turn clockwise to
m'rimize the dead space.
"CUT >>|" - adjust the dead space of CH2, turn
arit'clockwise to maximize the dead
space and turn clockwise to
m'rimize the dead space.
"ADJUST" - to confirm the setting, use paper clip to
press the button.
Headphones Monitoring selector
Select the source to be monitored with headphones.
"CUE" - CH1 & CH2
"MIX" - CH1 & CH2 at left side, and Master output
at right side
"MASTER" - Master output
PHONES outputjack (1/4" + 3.5mm)
Connect to your headphones.
EN-5